Furnace Metals Melting portable The Hybrid Metals Melting Kiln is a
small and portable combination furnace for both cupelling or melting
pure metals. This Hybrid Kiln Kit supplies you with everything you need
(except propane torches) to melt 1 to 5 oz of gold or scrap metals (1 to
3 ounces capacity for silver). At only 3 pounds, you can take it to the
field with you and melt placer gold. It consists of a 1" base layer and
1.5" kiln chamber - all wrapped in a stainless steel jacket to keep it
together. The lid is 1" thick. The alumina silica refractory material is
good for up to 2300 degrees Fahrenheit. Once the material reaches the
targeted melting temperatures, the refractory material will shrink
approximately 5% which will create small cracks in the material when it
cools. However, cracking is not detrimental to the operation of the kiln
or the life expectancy of the kiln. Two torches are needed to create
the swirling heat effect (see photo). Can be used to perform
scorification assays in the field, too. Hybrid Metals Melting Kiln Kit
includes: Kiln, 4 premium bone ash cupels, 2 mini graphite crucibles, 2
oz gold (1 oz silver) graphite loaf mold, stainless steel mini tongs for
cupels, 6 inch scissor tongs (not pictured), 3 ounces of melting flux,
Instructions for both cupelling and melting * Propane bottles and
nozzles not included * NOTE FROM MANUFACTURER: The Kwik Kiln is designed
to be heated with 2 pencil tip PROPANE torches simultaneously.
Manufacturer will not warranty any Kwik Kiln heated too high,
improperly, or in a manner that goes against its design. This includes
using other types of torches, or using Mapp gas, which gives off more
heat. Use propane only. This kiln ships via Priority Mail. Please be
sure to provide an address where you receive US Mail.
READ MORE >>> Furnace Metals Melting Portable
/*