Carbon
In Pulp is the absorption of compounds into carbon Dicyano Aurrat.In the process of carbon-in-pulp adsorption occurs after the leaching of
mineral ore slurry in a tank. And during the washing, the
carbon-in-leach and adsorption occur simultaneously. In both processes mineral ore
leaching slurry will be transferred from one tank into the recovery tank of
carbon using a pumping machine. This is generally accomplished
by passing the slurry through a series of adsorption vessels coupled with the
periodic transfer of carbon, usually associated with pulp, and in the opposite
direction. Column tanks are often used
consists of a large carbon column (diameter 5 to 8 feet) and 15 to 20 feet in
height, and filled with activated carbon. Minimum load of carbon rule of
thumb is one pound of activated carbon per 0.1 ounces of gold are present in
solution, and usually it's a few pounds per 1 / 10 ounce
Two main methods Carbon In Pulp (CIP) and Carbon Columns may consist of the most widely used technique for extracting gold today. Both methods use a large tank in the column parallel step where gold is dissolved in the slurry (pulp) through a chemical process and combine agitation, oxygen and cyanide. In CIP, the carbon is mixed with a solution of cyanide leach and ore agitated in the Tank leaching, and the adsorption process will separate the gold. This will bring together between carbon and gold cyanide solution which is attached to the carbon. Granular carbon is often hard to use in a variety of sizes between 10-16 mesh. Carbon is then filtered by using the screening, on-screen screening of carbon will settle and the liquid is finely ground ore (-100 mesh) will be screened out through the screen into the tank.CIP treatment system can be described simply as a picture diagram below:
Diagram of the processing of gold with carbon in pulp
/*