Gold Testing

       The testing process gold from gold bouillon is very necessary, in which the gold content so that the results we obtain can be seen the most of what percentage of karat or purity levels of the value contained in the gold metal. In the process of testing the gold, there are several methods that can be used, ranging from gold assay methods in a simple way to use chemical solutions to using digital tools. Several types of testing processes such as methods Touchstone testing, Acid testing kits, Electronic gold testers.

      Touchstone testing is the testing of gold by using a textured black stone and is very light or even with the slate. In testing this gold requires an acid to see references from the gold content being tested. The way the test is to rub a gold metal on black stone, so it will look a yellowish colored scratches scratches from gold or small deposit of gold on the surface of the touch stone then do the same with a known gold item, apply a small drop of the test acid to each mark and observe - compare the reaction of the acid and repeat the test with a different Karat acid until a match is observed. Remember to test a fresh portion of the mark as you don't wont to cross contaminate the test acids. This method is best suited for known items of gold that are not hallmarked and you just really need to determine the Karat or purity of the gold. Touchstone testing compares how gold alloys of known and unknown fineness react to acid. For gold, the test is based on the fact that 24K gold resists all but the strongest acids. The purer the gold (the higher the karatage), the stronger the acid required to change its character or to dissolve it.

         Acid test kit is a method of testing by placing a small drop of acid to the surface of the item, sometimes it is required that you scratch the test surface in an inconspicuous place to be sure your not testing a gold plated item, this can be done with a pocket knife or small file. By breaking the surface of the metal the acid will give a more accurate result. Place a small drop of acid directly on the scratch starting with theAcid gold test lowest Karat acid first e.g.9kt. Observe the reaction and compare to a colour reference chart that is usually included, repeat the test with a higher value Karat acid if necessary until a colour match is found. Genuine or solid gold will usually leave a brown stain and non gold items will leave a green stain on the metal or react by bubbling and sizzling indicating that the item is either gold plated or contains copper as a base metal. Rinse the test item in clean water to remove any excess test fluid, any light staining left behind can be easily removed with a pencil eraser or buffing wheel. Always exercise caution when using Acid Testing Kits and be sure to read all safety information provided with your kit, acid is very corrosive and toxic. Acid testing is probably the most widely used of all the gold testing methods. A selection of different Karat acids are formulated to react in different ways when they come into contact with genuine gold items of a certain Karat

        The electronic gold tester is a relatively new addition for the scrap gold dealers toolbox, briefly it consists of an electronic circuit and a test plate of reference gold all housed in a neat desktop size box. Tri Electronics GT-3000 Gold Tester is a testing tool which is very good gold is used. The Electronics GT-3000 Gold Tester is a portable electronic device, developed by TRI Electronics, Inc., for efficient and quick determination of gold karat value (from 6 to 18 karat), and pure platinum. The GT-3000 Gold Tester also distinguishes solid gold from gold-plated items. GT-3000 Professional Electronic Gold this assay is very easy to use in testing gold, quickly and efficiently detects karat value of the gold from 6 to 18 karats. Also detects platinum and separates solid gold items from gold plated ones. Provides a numeric reading on the LCD display that corresponds to the karat table. The GT-3000 test set consists of a display unit which operates on two 9-volt alkaline batteries, sensor with rotary cap to obtain a drop of conductive gel, and a tri-cable for connecting the unit to the sensor and test plate.
         From some idea of ​​testing the gold, maybe you can decide the best way for you to test gold. Scrap gold acid test kit is working well, but you must also be careful in its use, because this is a dangerous chemical that is also when you are not careful.With that said, again we must admit we do like electronic gold testers. We’ve tried virtually all of them and recommend the Tri Electronics Gold Tester GT-3000. To test tools Tri Electronics GT-3000 Gold Tester, We have communicated directly with a Tri Electronics distributor only to be told we should buy for a large number, but we can get it on Amazon even just buying a product. In addition to the Amazon, you usually can find Tri Electronic Gold Tester GT 3000 for sale $ 215 to as much as $ 279.95. But you will get a discount if purchased from the Amazon.

This multiple test tools that you can buy gold in the Amazon

The Electronic Gold Tester


 

Tri Electronics GT-3000 Gold Tester







Customer Review:






TRI ELECTRONICS GT-4000 ELECTRONIC GOLD TESTER 6-24K DETECTION


  


Customer Review:




Acid Test Kit











Customer Review:









Customer Review:






READ MORE  >>>> ANALYSIS OF GOLD ORE